Quad System
4100P Color Quad with PIP
Description4 Canal Video Color Quad Processor is designed for security monitor or TV monitor. Input signals can up to 4 different video source. The VIDEO & S-VIDEO output to TV and VGA out to monitor. The VIDEO & S-VIDEO output can be recorded by VCR. Real time displays each video in 1/4 display area at the same time, and supports powerful PIP (Picture In Picture), OSD, Date, Time & Channel Name function. Besides, you can rename the channel.
Features
Pure Hardware design, just Plug & Display, No software driver required, compatible with any operation system.
Switchable NTSC, PAL video system .
Support Composite VIDEO, S-VIDEO out to TV or recording by VCR, VGA out to Monitor (15.75KHz to 31.5KHz for NTSC,15.625KHz to 31.25KHz for PAL).
Support 4 composite video input connects.
Can be applied to TV / VGA monitor security individually or security system.
VIDEO 1-4 buttons are used to display single channel video and set 'main-channel' for PIP mode. After PIP (Picture In Picture) button, VIDEO 1-4 buttons will be used to select the small sub-window, we call it 'sub-channel'. If main-channel and sub-channel are the same, switch to single channel mode automatically.
Real time display each video on 1/4 display area at the same time.
Supports 4 TTL input port and 1 TTL level output port(GPIO Port).
Supports Channel Display Auto Switch (Sequential function), there is an interval of 5 seconds between two channels and it can be adjusted.
Date, Time & Channel Name show status of each Quad Display, re-name the channel.
Apply with remote controller supports: PIP, QUAD, OSD, ENTER, Channel select, and setup function more user-friendly.
PIP display can be moved to anywhere on your screen.VGA Monitor Requirement
For NTSC : HSYNC = 31.5KHZ VSYNC = 60Hz
For PAL : HSYNC = 31.25KHz VSYNC =50HZ
Front Panel
Back Panel
*specs subject to change without notification
Pay securely with any major credit card through PayPal!
Please check our policies page for refund and cancellations.
